Get My Options
Get My Options
PROFESSIONAL INSTALLATION · PREMIUM PRODUCTS · TRUSTED SINCE 2000
Mon–Fri 9–5Sat–Sun Closed
Truck Bed & Tonneau Covers · Belleville · Metro East & St. Louis

Truck Bed Covers
Measured, Fit, Installed

Soft roll-up, tri-fold, retractable, or a hard one-piece lid. We match the cover to your truck and bed length, install it clean, and stand behind the work. Tell us what you drive and what you haul, and our accessory specialist will lay out the options.

Get My Cover Options
Four Ways to Cover a Bed

Which Cover Is Right for Your Truck?

There is no single best cover, only the one that matches how you load your bed. Here is the honest rundown of the four families, with no sales pitch attached. We do not post prices, because what a cover and its install come to depends on your truck, your bed length, and the cover you choose. Tell us those three on the quote form and we will give you a straight number.

Soft roll-up bed cover rolled forward to open the bed of a white full-size pickup

Soft Roll-Up

A vinyl cover on rails that rolls to the cab and straps out of the way. The lightest option and the quickest to clear the whole bed when you need to throw something tall in. Trades away the hard-lid security of the other styles.

Get My Options
Hard folding bed cover fitted to a grey heavy-duty pickup, rear three-quarter view

Hard Folding / Tri-Fold

Rigid panels hinged in sections that fold forward toward the cab. The middle ground most truck owners land on: a hard top surface and real security, but you can still open two-thirds of the bed in seconds without tools.

Get My Options
Retractable aluminum bed cover closed flush over the bed of a white full-size pickup

Retractable

Slats that retract into a canister behind the cab, so the cover never leaves the truck and you can open it partway and stop wherever you want. Most retractables lock at multiple points. The canister does take up some bed space at the front.

Get My Options
Hard one-piece bed cover raised on gas struts over the bed of a blue pickup, rear three-quarter view with the tailgate down

Hard One-Piece

A single rigid lid, often paintable to match your truck, that lifts on struts like a trunk. The most finished look and the tightest seal against weather. It is one piece, so taking it off for a tall load is a two-person job, not a thirty-second one.

Get My Options
Since 200026+ years building vehicles
National NetworkMost covers in by tomorrow
Fit by Bed LengthMatched to your exact truck
Installed & WarrantiedLifetime workmanship warranty
Local Install, Done Once

Tonneau Cover Installation in Belleville, Metro East & St. Louis

Xclusive Autosound has been the same local shop on Old Collinsville Road in Belleville since 2000, and truck owners from across the Metro East and the St. Louis area bring us their beds to get covered. A bed cover is one of those parts that looks simple in a box and turns into an afternoon of guesswork in a driveway. Clamp placement, rail alignment, tailgate clearance, and drain routing all decide whether the cover seals, latches, and still looks right two winters from now.

We source covers through our national parts network, so you are not picking from whatever is on a shelf. Most covers are here by the next day, and same-week appointments are usually available. Not sure which style fits how you use your truck? That is exactly what our accessory specialist is for. Start with the quote form and tell us your year, make, model, and bed length.

No Surprises on the Invoice

What Goes Into Every Install

We confirm your year, make, model, cab, and bed length before anything is ordered, so the cover that shows up is the one that fits.
Rails and clamps set square to the bed rails and torqued properly, so the cover opens and closes the same way on day 400 as on day one.
Seals and weather strips seated along the rails, bulkhead, and tailgate the way the manufacturer specifies.
Drain tubes and hardware routed clear of your bed liner, tie-downs, and any bed lighting or power you already have back there.
Tailgate, latches, and locks checked and adjusted so the tailgate still drops clean and the cover actually locks shut.
A walkthrough before you leave: how to open it, how to remove it, and how to keep the seals and rails working through a Midwest winter.
Our lifetime workmanship warranty on the install, and if the cover itself ever needs a warranty claim, you bring it to us and we handle the manufacturer.
Clean cleanup. No shavings in the bed, no packaging left for you to haul off.
Fall and Winter in the Metro East

The Season That Makes People Cover the Bed

Most of the covers we install go on in the fall, and the reasons are always the same three. Rain and snow stop filling the bed, so tools, feed, luggage, and anything cardboard stay dry instead of sitting in a puddle that freezes overnight. Whatever is back there is out of sight and locked down, which matters more once it is dark at five o'clock. And you stop shoveling the bed out before you can use it.

If you are planning on a cover before the weather turns, earlier is easier. Most covers arrive through our network by the next day and same-week appointments are usually open, but the fall stretch is our busiest for truck work.

How It Works

Simple, Start to Finish

1

Tell Us Your Truck

Year, make, model, and bed length, plus how you actually use the bed. Know the exact cover you want? Even easier. Not sure? Our accessory specialist will narrow it down with you.

2

We Source It

We pull the right cover for your configuration from our national parts network. Most arrive by the next day, so you are not waiting around on a freight truck.

3

We Install It Right

Measured, squared, sealed, and checked on your truck, then walked through with you before you drive off. Backed by our lifetime workmanship warranty.

Covers We Source

The Names You Trust, and Then Some

ExtangTruXedoUnderCoverRetraxBAKLundTrail FXBedRug

And hundreds more. If your brand is not listed, ask. We can almost certainly get it. Covering the bed is usually one job on a longer list, so have a look at the rest of our truck and car accessories, from bed liners and tool boxes to bed and rock lighting. Heading into winter, plenty of trucks leave here with a cover and a remote start on the same visit.

Why Buy It Here

We Source It, Install It,
and Stand Behind It

  • Every major cover family, matched to your exact bed, not the closest guess.
  • Most covers in by the next day through our national network.
  • An accessory specialist who helps you choose, not upsell.
  • No freight boxes on your porch, no return saga if the fit is wrong.
  • Warranty claims handled here. You bring the truck, we deal with the manufacturer.
  • Lifetime workmanship warranty, from the same local Belleville shop since 2000.
Get My Cover Options
What Our Customers Say
★★★★★4.8 / 5· 130 Google reviews
Common Questions

FAQ

How do I know which cover fits my truck?

Fit comes down to your year, make, model, cab configuration, and bed length. A cover built for a 5'7" bed will not seal on a 6'5" bed, and beds with factory cargo rails or a bed liner sometimes need different hardware. Give us those details and we match the cover to your truck before anything is ordered.

What is the difference between a soft roll-up and a hard folding cover?

A soft roll-up is vinyl on rails: the lightest option and the fastest way to open the entire bed. A hard folding cover uses rigid panels, so you get a solid top surface and real security while still folding most of the bed open in seconds. Which one is right depends on whether you value hauling tall loads or locking the bed more.

What does a retractable cover give me that a folding one does not?

A retractable rolls into a canister behind the cab, so the cover stays on the truck and you can stop it at any point to open just part of the bed. That comes at the cost of some bed length at the front for the canister. Folding covers keep the full bed but only open in set sections.

Can I still haul tall loads with a cover on?

Yes, but how easily depends on the style. Soft roll-ups and folding covers open the bed in seconds with no tools. A hard one-piece lid has to be unbolted and lifted off, which is a two-person job. Tell us how often you haul something that will not fit under a lid and we will steer you accordingly.

Will a cover actually keep rain and snow out of the bed?

A properly installed cover keeps the weather off your cargo, which is why most of ours go on in the fall. No bed cover is a sealed box, though: beds have drains, and the tailgate seam is a seam. Installed right, with the seals seated and the drains routed correctly, what you put back there stays dry.

How soon can you get one on my truck?

Most covers arrive through our national parts network by the next day, and we schedule your install for when it lands. Same-week appointments are usually available. Fall is our busiest stretch for truck work, so if you want it on before the weather turns, reach out sooner rather than later.

Can you install a cover I already bought?

Often, yes. Send us what you have and your truck details and we will let you know. Buying it through us means the install is covered by our lifetime workmanship warranty and we handle any manufacturer warranty claim for you.

Get the Bed Covered Before Winter

Tell us your truck and bed length. We'll source the right cover, usually by tomorrow, and install it right.

Get My Cover Options Call 618-222-2234